Manual Magnat QUANTUM CENTER 73 (page 8 of 44) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

581686

Zoom out

Zoom in

1/44

BI-WIRING AND BI-AMPING

Bi-wiring means using separate cables to carry the high and low audio frequencies. Bi-amping takes this

idea one step further and uses separate power ampliers as well as separate cables for high and low

frequencies. Bi-amping in particular produces an additional improvement in sound reproduction quality.

The special connection terminals of the QUANTUM loudspeakers support both conventional connection

and operation in bi-wiring and bi-amping modes. There are four screw terminals on each speaker. The

top pair are for the tweeter (high frequencies), the lower pair for the woofer (low frequencies). The

factory-installed metal strips connecting the positive and negative terminals are for conventional 2-wire

connection and must be removed for bi-wiring and bi-amping operation. The pictures below show the

correct set-up for conventional operation (Fig. 4a), bi-wiring (Fig. 4b) and bi-amping (Fig. 4c).

MAGNAT QUANTUM CENTER 73

The QUANTUM CENTER 73 loudspeaker visually and acoustically ideally matches the other QUANTUM

models. The loudspeaker is placed immediately on or under the television set. Otherwise please adhere

to the general recommendations outlined in the previous chapters.

MAGNAT QUANTUM 731A

The QUANTUM 731A active subwoofer visually and acoustically ideally matches the other loudspeakers

in the Vica series. Please refer to the separate operating instructions supplied with this product.

CONNECTING TO AN AV RECEIVER

Figs. 5 and 6 show two different methods of connecting to AV receivers.

Fig. 5: AV receiver without subwoofer output.

Fig. 6: AV receiver with subwoofer output.

HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS

All MAGNAT loudspeakers are designed and built for optimum sound reproduction with the tone controls

in the central position – i.e. with “linear” amplier output. Turning up the bass and treble controls too far

delivers more power to the woofers and/or tweeters, and at high volumes this can actually destroy the

speaker units!

If the output of your amplier is signicantly higher than the rated power handling capacity of your

speakers extremely high volumes can physically destroy your speakers. This doesn’t actually happen

often but you should be aware that it is possible.

Weak ampliers with low output ratings can actually be more dangerous for your speakers at medium

volumes because weak ampliers may overload much faster than powerful ones and this causes

measurable and audible distortion, which is extremely dangerous to your loudspeakers.

Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud music

make sure that your amplier can deliver at least as much power as the speakers’ power-handling rating.

THE SOUND YOU CAN’T HEAR...

Ampliers, tuners and CD players can all produce inaudible high-frequency signals – and this doesn’t

only apply to cheap products. If your tweeters fail at low or medium volumes you should have a qualied

technician check your system components for dangerous inaudible signals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Magnat QUANTUM CENTER 73 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Magnat QUANTUM CENTER 73 Manual

Product: