Manual Magnat Power Core One Limited (page 9 of 44) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

581731

Zoom out

Zoom in

1/44

FIG. 1 POWER SUPPLY / REMOTE SWITCH-ON CONNECTION

(1) Terminal for +12 V battery voltage

(2) REM terminal for remote switch-on

(3) GND terminal for the ground, to the battery’s minus pole

(4) Battery

(5) Cable fuse

(6) To your car radio’s automatic aerial connection

If your car is not equipped with an automatic aerial connection, connect this cable’s plus pole (+) to the ignition lock. An on/off switch

should be inserted in this case. Make sure that this switch is switched off if the amplifier is not used.

FIG. 2 OPERATION WITH STEREO CAR RADIO

Connect and set the amplifier as shown in Fig. 2 if it is to be controlled by a car radio with two output channels.

(1) To the car radio, left output

(2) To the car radio, right output

(3) Subwoofer

FIG. 3 OPERATION WITH ONE CAR RADIO WITH SUBWOOFER OUTPUT

(1) To the car radio, subwoofer output

(2) Subwoofer

FIG. 4 USE IN MASTER/SLAVE MODE

4a One subwoofer connected to each amplifier

4b One subwofer in bridge mode between 2 amplifiers

(1) To the car radio, subwoofer output

Note: instead of a car radio with subwoofer output, a normal STEREO radio may be connected to the „LINE INPUT“ jacks (L and R).

(2) Subwoofer

FIG. 5 OPERATING ELEMENTS AND IN/OUTPUTS

(1) Slave input

(2) Master output

(3) Low-level input

(4) Input level control

(5) Cross-over frequency control for the low pass

(6) Cross-over frequency control for the subsonic filter

(7) Bass booster control

(8) Phase regulator

(9) Master/slave switch

(10) Connection for volume remote control

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Magnat Power Core One Limited in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Magnat Power Core One Limited Manual

Product: