Manual Magnat Cinema Ultra LCR 100-THX (page 6 of 44) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

665038

Zoom out

Zoom in

1/44

Dear MAGNAT Customer,

Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You have

made an excellent choice. The high-quality speakers produced by MAGNAT are renowned all over the world.

Please study the instructions and information below carefully before using your new loudspeakers.

MAGNAT CINEMA ULTRA

The LCR 100-THX front speaker and the RD 200-THX dipole surround sound speaker are both parts of the

Magnat Cinema Ultra loudspeaker family. Other models include the SUB 300-THX subwoofer and the Dolby

Atmos-compatible AEH 400-ATM universal add-on speaker.

A 5.1 system comprising three LCR 100-THX front speakers, two RD 200-THX dipole surround sound speakers

and one SUB 300-THX subwoofer meets the requirements of the THX Ultra2 standard. The system can be

expanded without any difficulty (e.g. a second subwoofer for 5.2 or further surround sound speakers for 7.2).

In addition, all the models can also be used outside the Cinema Ultra range and with non-THX-licensed devices

as extremely powerful home cinema components.

GENERAL INFORMATION

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment

of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths up to 3 m and at

least 4 mm² for lengths above 3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the

loudspeakers in their planned positions and cut the cables to the right length. The cables for both channels

should always be exactly the same length.

Strip 10 – 15 mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning

them with solder – insert them in the terminals and tighten the terminal screws firmly (fig. 1). Loudspeaker

cables with CE-compliant banana or single-pin plugs (4 mm) or forked fittings can also be used.

For good sound it is imperative that the cables must be connected in such a way that the speakers are “in

phase”. This means that the black negative terminals on the speakers (-) must be connected to the negative

(-) terminals on the amplifier, the red positive (+) speaker terminals to the positive (+) amplifier terminals. To

make this easier one wire of most speaker cables is marked with a coloured strip or a ridge in the insulation.

Before switching on the system double-check all your connections and make sure that the terminal screws

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious damage

to your amplifier!

GENERAL REMARKS CONCERNING SETUP

The LCR 100-THX front speaker complies with the THX Ultra2 standard for vertical and horizontal operation

in all positions. This results in a variety of setup possibilities (Fig. 2 a-d). In mixed operation mode combining

vertical and horizontal positioning, it is advisable, for acoustic reasons, to have identical alignment of the

left and right speakers.

The loudspeakers offer several options for wall mounting. Wall-mounting brackets are fitted at the rear, with

both vertical and horizontal alignment possible in the case of the front speaker. Alternatively, the speakers

can be mounted using a VESA standard wall bracket. Distance between the holes:

- 200x200mm M6 for the LCR 100-THX front speaker

- 200x100mm M4 for the RD 200-THX dipole surround sound speaker

Four self-adhesive rubber feet are included for the front speaker for setting up on a loudspeaker stand or shelf.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Magnat Cinema Ultra LCR 100-THX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Magnat Cinema Ultra LCR 100-THX Manual

Product: