Manual Magnat Cinema Ultra AEH 400-ATM (page 6 of 43) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

665041

Zoom out

Zoom in

1/43

Dear MAGNAT Customer,

Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You have

made an excellent choice. The high-quality speakers produced by MAGNAT are renowned all over the world.

Please study the instructions and information below carefully before using your new loudspeakers.

MAGNAT CINEMA ULTRA

The Dolby Atmos-compatible universal add-on speaker is a part of the Magnat Cinema Ultra loudspeaker

family. Other models include the LCR 100-THX front speaker, the RD 200-THX dipole surround sound speaker

and the SUB 300-THX subwoofer.

All of the models can also be used outside the Cinema Ultra range as extremely powerful home cinema com-

ponents

ABOUT DOLBY ATMOS

Dolby Atmos is a new audio standard for cinemas and home cinemas. Atmos brings a third dimension into

the soundscape for the first time in the form of treble channels. These treble channels are emitted either by

separate add-on speakers like the Magnat AEH 400-ATM or via add-on speakers integrated into the front

and rear speakers. For even distribution of the treble sound field that is not locatable for the human ear, the

add-on loudspeakers emit their sound into the room in the direction of the ceiling. The reflection of this sound

then reaches the listeners, giving the impression of a three-dimensional soundscape.

The AEH 400-ATM can, in addition, be switched to direct emission and then be used as a wall or ceiling speaker.

This provides various options for expanding the existing home cinema system.

Please note that, for a true Dolby Atmos experience, both the source material (e.g. Bluray) and the electronics

(e.g. AV receiver) have to meet the Dolby Atmos audio standard.

GENERAL INFORMATION

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment

of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths up to 3 m and at

least 4 mm² for lengths above 3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the

loudspeakers in their planned positions and cut the cables to the right length. The cables for both channels

should always be exactly the same length.

Strip 10 – 15 mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning

them with solder – insert them in the terminals and tighten the terminal screws firmly (fig. 1). Loudspeaker

cables with CE-compliant banana or single-pin plugs (4 mm) or forked fittings can also be used.

For good sound it is imperative that the cables must be connected in such a way that the speakers are “in

phase”. This means that the black negative terminals on the speakers (-) must be connected to the negative

(-) terminals on the amplifier, the red positive (+) speaker terminals to the positive (+) amplifier terminals. To

make this easier one wire of most speaker cables is marked with a coloured strip or a ridge in the insulation.

Before switching on the system double-check all your connections and make sure that the terminal screws

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious damage

to your amplifier!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Magnat Cinema Ultra AEH 400-ATM in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Magnat Cinema Ultra AEH 400-ATM Manual

Product: