616524

Magix Audio cleaning lab 2014 Manual

40
Zoom out
Zoom in
Previous page
1/156
Next page
40
www.magix.com
the right (6). You can monitor the recording level on the LED display during
recording. If the display reaches the upper LEDs, clipping occurred at some
point. In this case, you should definitely check the recording for clipping and, if
necessary, repeat the recording using a lower recording level.
7. At the end of the recording you will be asked if you want to use the recording.
The newly-recorded material will be placed at the current position of the
playback marker in the project.
Note: If there is no level displayed, chances are the wrong input has been selected.
Open the record settings dialog using the "Settings..." button and click on "Audio
input" to correct the error with Automatic input and level (view page 43).
Basic knowledge about recording with the PC
The record function converts analog audio signals – records, tapes, sounds, speech –
into digital data, which can be saved on the PC and edited with MAGIX Audio &
Music Lab 2014 Premium.
The device which is used to digitalize the audio signals is already built into most
sound cards and aptly called an analog-digital converter, often abbreviated with A-to-
D, ATD or A/D. In order to record sounds, the A/D converter takes samples of the
sound to be digitalized at fixed intervals by measuring the voltage level of the signal.
The frequency of the sampling is called the sample rate and naturally lies within the
kHz frequency range; several thousand times per second. The higher the sample rate,
the more samples are recorded by the A/D converter, thus making the sound
conversion closer to the original.
The precision with which the A/D converter measures the voltage level of the analog
signal is determined by the sample resolution. The same principle applies here: The
finer the resolution, the better and more natural the digital conversion.
Audio recordings in CD quality are recorded with a sample rate of 44.1 kHz and a
resolution of 16 bits.
Connecting the source for recording
First of all, the source of the audio material must be connected to the sound card
input. Again, there are several possibilities which primarily depend on the type of
equipment you have.
If you are recording from a microphone, then please connect the microphone to the
microphone jack on your sound card (usually red).
If you want to record material from a stereo system, then you can use the line-out or
AUX out jacks on the back of your amplifier or tape deck. This involves connecting
them to the sound card input (usually red).
If your amplifier has no separate output (other than for the speakers), then you can
use the connection intended for headphones for your recordings. In most cases, you
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magix Audio cleaning lab 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magix Audio cleaning lab 2014 in the language / languages: English as an attachment in your email.

The manual is 12,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info