550719

Maginon WK-3HD Manual

25
Zoom out
Zoom in
Previous page
1/36
Next page
23
Advantages of PIR sensors (Passive Infrared Sensors)
In order to save on battery power, an infrared camera is normally in Standby mode in which only the
main sensor is active. As soon as the central sensor zone detects wild animals, the camera is switched
on and starts taking photos. The time between the activation and the start of shooting is referred to as
triggering time.
Where wild animals do, however, move past the camera swiftly, it is possible that the photo only shows
the rear part of the body or possibly nothing at all. The MAGINON WK 3 HD solves this problem due to
the unique design of the lateral PIR sensor zone. The combination of the two lateral sensor zones and
central sensor zone produces a 100°-120° induction angle, by far exceeding the angle of an individual
sensor.
Where wild animals rst pass through the detection range of the side PIR sensor zone, the camera is
activated and is ready to start shooting after 1.0 seconds. Where the wild animal then slowly enters the
detection range of the central sensor, the camera starts shooting and thus records the entire body of
the animal. This process takes approx. 0.2 seconds.
Where the wild animal remains only within the detection range of the side sensor zones, the system is
designed as follows to prevent the permanent supply of power to the camera:
Where the wild animal does not enter the detection range of the central sensor zone and thus does not
trigger the sensor, the camera returns to the Standby mode after 5 minutes. Where triggering incidents
occur twice in succession only within the detection range of the side sensor zone, the camera is not
activated by the side sensor zone but only by the central sensor zone. At a later stage when the wild
animal nally enters the detection range of the central sensor zone and does not move rapidly, the
photo – based on the standard reaction time of one second – will probably capture the entire body of
the animal.
7.6. Aligning the camera
The Test mode is advantageous for determining the best possible detection angle and range of the
movement sensor. For this purpose attach the camera at approx. 1-2 m height to a tree and align the
camera with a desired direction.
Move slowly from one side of the observed area to the other. Move parallel to the camera Try out
dierent angles and distances.
• The blue LED on the front of the camera indicates that you were detected by a side sensor zone.
• The red LED on the front of the camera indicates that you were detected by a central sensor zone.
… 25 …


Need help? Post your question in this forum.

Forumrules
1

Forum

maginon-wk-3hd

Reset search

  • How to reset a new password to my maginon wk3 camera I forgot the password ? Submitted on 10-6-2023 at 13:27

    Reply Report abuse

  • Finns manualen på svenska ? Kameran fyller kortet utan stopp . Submitted on 10-12-2021 at 10:43

    Reply Report abuse

  • how do I programme the camera to operate from 24hrs to 05 hrs Submitted on 12-6-2020 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon WK-3HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon WK-3HD in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maginon WK-3HD

Maginon WK-3HD User Manual - German - 36 pages

Maginon WK-3HD User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info