289164
31
Zoom out
Zoom in
Previous page
1/51
Next page
EN-31
Changing Camera Start Logo Image
You can specify the start logo image for camera. You can select the new start logo
image from among the captured still images.
1. Slide the mode switch to [ ].
2. Select the image that you want to be a new start
up screen with the e / f buttons.
3. Press the MENU button.
4. Select [Setup 1] with the f button.
5. Select [Start Logo] with the c / d buttons, and
press the SET button.
6. Select [User Image] with the c / d buttons, and
press the SET button.
7. Select [Execute] with the c / d buttons, and
press the SET button.
User selected image is saved in the special area of the internal memory. In case of formatting
the internal memory, the user selected start logo image will not be lost.
“NO IMAGE” message is displayed when “User Image” is selected and no images are stored in
the SD/SDHC memory card or internal memory.
If the image recorded voice memo is selected to be the start logo image, the voice memo can
only be played back in the playback mode.
The capacity for saving user image is only one. The previous start logo image will not be
recovered if you select another one as a new start logo image.
Playing Back Still Images/Video Clips on a TV
You can also play back your images on a TV screen. Before connecting to any video
devices, make sure to select NTSC/PAL to match the broadcast standard of the video
equipment you are going to connect to the camera.
1. Slide the mode switch to [ ].
2. Connect one end of the AV cable to the AV OUT terminal of the camera.
3. Connect the other end to the AV input of the TV set.
4. Turn on the TV and the camera.
5. Play back the still images/video clips.
The method of operation is the same as playing back still images and video clips on
the camera.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon dc 7 x4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon dc 7 x4 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maginon dc 7 x4

Maginon dc 7 x4 User Manual - German - 51 pages

Maginon dc 7 x4 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info