578680

Maginon CRB-100 - 48144 Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
15
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: CRB-100 PRODUCT CODE: 48144 12/2014
While listening to a radio station you would like to save as a pre-set, press and hold one
of the buttons numbered 1-6 until the preset station number is shown. The button you
pressed is now the preset button for that station.
Automatic store / Preset scan
Automatic scan and store: While listening to the FM Radio, press and hold the F/PS
button for 3 seconds. The receiver will automatically scan and save the station listening
to. While listening to the AM Radio, press and the F/PS button for 3 seconds. The receiver
will automatically scan and save the station you are listening to.
Scan saved stations: Press the F/PS button once to perform the scanning functions. In
FM mode, press the F/PS button and the stations in that FM band will be scanned; press
the button in AM mode and scan the band stations of that AM Band.
Local / DX
Press SEL button repeatly until the display shown “LOC”. Rotate the VOL button to choose
“LOC ON“ or “LOC OFF”.
LOC ON: Showing on the display, means local reception is turned on;
LOC OFF: Showing on the display, means distant reception is turned on. Local and
distance reception setting can facilitate the radio reception, depending on the location
in which the radio is being used.
6.4. RDS Operation
RDS function
RDS (Radio Data System) service availability varies with areas. Please understand if RDS
service is not available in your area, the following service is not available, either.
AF-Alternative frequency
In RDS mode, press the AF button on the panel to turn the AF function on or off. When
the radio signal strength is poor, enabling the AF function will allow the unit to same
PI (Program Identification) as the current station but with stronger signal strength, so
that you do not have to retune the stations when driving between different transmitter
coverage areas. When AF symbol is on, it means RDS information is received; when AF
symbol is flashing, it means RDS information is not yet received.
PS (Program Service Name): the name of the station will be displayed instead of
frequency. If RDS service is not available in your area, turn off the AF mode. Default
setting is ON.
Remarks: In case there is no AF button on the front panel, press and hold the volume
button to turn AF on or off.
In RBDS mode, no AF function.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maginon CRB-100 - 48144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maginon CRB-100 - 48144 in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info