531504
8
Zoom out
Zoom in
Previous page
1/10
Next page
USE / GEBRAUCH
Align the food pusher.
Den Andrücker
einsetzen.
Switch the appliance on.
Das Gerät einschalten.
Select the required slice
thickness using the
thickness control knob.
Die gewünschte Schnittstärke
einstellen.
Always use the food pusher when slicing food as the blade is extremely sharp.
Do not use your food slicer for more than 5 minutes at one time. The appliance is fitted with a thermal
failsafe which will automatically cut the motor out if the slicer is overloaded or if it has been running for
too long. If this happens, switch the appliance off and leave the motor to cool for at least 30 minutes
before using the slicer again.
Das Messer ist sehr scharf. Benutzen Sie immer den Andrücker, vor allem wenn das zu schneidende
Produkt klein ist.
Benutzen Sie den Allesschneider nicht länger als 5 Minuten. Er ist mit einem Hitzeschutz ausgestattet, der
das Gerät bei zu großer Belastung oder zu langem Gebrauch automatisch ausstellt. In dem Fall kommt es
zum Stillstand, aber die Kontrollanzeige leuchtet weiter. Wenn das eintreten sollte, schalten Sie den
Allesschneider aus und warten Sie mindestens 30 Minuten, bevor Sie ihn erneut benutzen.
Hold the food in place using
the food pusher handle.
Das Produkt mithilfe des
Andrückers festhalten.
!
Turn the thickness control
knob back to 0 after use.
Nach dem Gebrauch die
Scheibenstärke auf 0
stellen
P
lease wash all parts before first use.
Vor dem ersten Gebrauch sämtliche Teile mit einem feuchten weichen Tuch abwischen.
Ensure the food carriage is
in the start position.
Den Schlitten bis zum
Anschlag zurückziehen.
Schnittstärkeneinstellung.
Switch the appliance off.
Das Gerät ausschalten.
Collect the food slices with
your left hand or using the
tongs.
Die Scheibe mit der
linken Hand oder mithilfe der
Zange entnehmen.
Place the food on the
carriage and push it firmly
against the back plate.
Das zu schneidende Produkt auf
den Schlitten legen und leicht an
die Anschlagplatte drücken.
Whilst the blade is rotating,
move the carriage back and
forth using your right hand.
Den Schlitten nach
hinten schieben.
If the slice thickness is not
correct, adjust the setting.
Wenn die Scheibe nicht die
gewünschte Stärke hat, die
Einstellung ändern.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magimix Le Trancheur T 190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magimix Le Trancheur T 190 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info