561735
6
Zoom out
Zoom in
Previous page
1/20
Next page
DO NOT SWITCH ON THE BUTTON ON THE MAIN BODY OF THE MACHINE UNTIL
YOU HAVE READ ALL THESE INSTRUCTIONS.
Always use your Ice Cream Machine on a firm, flat surface near a convenient power outlet.
Place the machine so that the ventilation slots on either side are unobstructed.
Check that the voltage shown on the rating plate corresponds to the voltage of the mains.
Connect the plug to an electrical socket.
MAKING ICE CREAM IS EASY!
1. Connect the plug to an electrical socket
2. Turn the freezing switch on (B) for at least 5 minutes before pouring the ingredients in.
3. Place the paddle into the bowl.
4. Lower the lid and motor unit (D) onto the bowl.
5. Switch the paddle motor on (E).
6. Pour the mixture in.
In 20/40 minutes you will taste the best ice cream, frozen yoghurt or sorbet.
OPERATING WITH THE FIXED BOWL
Press the button (B) situated on the body of the machine (fig. 1) – this will switch on the
compressor. The yellow indictor light will come on. Allow the compressor to run for ot least
5 minutes to start cooling the bowl before pouring in the mixture.
Place the paddle into the fixed bowl; make sure you use the correct paddle – the larger with
a bump on the bottom is to be used in the fixed bowl. (Fig. 2) The flat based paddle is used
for the removable bowl.
Fit the motor-lid assembly as follows:
Allow the clear lid to slide until the “Keyhole” part of the clear lid is over the hole in
which the spindle fits (fig. 3).
Push the spindle into the hole (fig. 4).
Slide the clear lid back into position, until a click is heard, this means that it is properly
slotted in. Ensure that the non-keyhole part of the lid fits between the top and bottom
collars of the spindle (fig. 5).
Lower the lid and motor unit onto the bowl whilst inserting the spindle into the top of the
paddle.
Turn the motor and clear lid in order to fit the tabs on the locking ring (F) into the holes
on the motor (Fig. 6).
Connect the cord of the paddle motor (C) to the socket on the machine body and switch on
to start operating the paddle.
Warning: ensure the paddle motor is fully locked otherwise it will not be possible to switch
it on. Connect the cord of the paddle motor (C) to the socket on the machine body and
switch on to start operating the paddle (fig. 7).
Next, pour in the previously prepared chilled mixture.
Depending on the quantity of ingredients and recipe used, you will have a delicious fresh ice
cream in 20/40 minutes.
4
6


Need help? Post your question in this forum.

Forumrules
1

Forum

magimix-gelato-chef-2200

Reset search

  • I have lost my recipe book and instruction manual for my Gelato chef 2200 majimix icecream maker. Can you email me another one please Submitted on 8-5-2020 at 15:23

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magimix GELATO CHEF 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magimix GELATO CHEF 2200 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info