787932
5
Zoom out
Zoom in
Previous page
1/17
Next page
98
OFF:
Power is OFF, the unit is
not running.
ON:
Continuous blending or food
processing action. The unit
stays ON until you switch to
OFF.
WARNING: Never leave the
blender on for more than one
minute!
PULSE:
Provides quick bursts of
pulsing action for more
control over the texture of
your food or drink. You must
hold the knob on PULSE to
keep the unit on, otherwise
the knob will automatically
move to OFF.
Power settings.
Cleaning the Magic Bullet Kitchen Express™ is
easy. All components, except for the motor base,
are dishwasher-safe.
STEP 1: The most important thing — ALWAYS
POWER OFF THE UNIT and UNPLUG the motor base
from the power outlet when it is not in use. Do not
attempt to handle the appliance until all parts have
stopped moving!
STEP 2: To start the cleaning process, empty the
bowl, making sure little to no food scraps remain.
Disassemble all parts. Make sure the blending cup/
cross blade and work bowl are not attached to the
motor base.
STEP 3: Simply place any of the parts (except for
the motor base) on the top rack of the dishwasher
or hand wash with warm, soapy water and rinse.
NEVER use the sanitize cycle as this may warp the
cups or work bowl.
MOTOR BASE.
To avoid risk of injury, NEVER attempt to clean
the actuator system on the motor base while the
Magic Bullet Kitchen Express™ is plugged in.
Do not attempt to remove any pieces from the
motor base.
Use a sponge or damp cloth to wipe down the
motor base until clean.
If necessary, you may use a small brush to scrub
the actuator system area to ensure it is clean (dried
food particles can prevent the tabs from working
properly).
IMPORTANT
Signals that it’s about time to buy a new blade: in
case of a bad smell, louder noise during blending,
burning air (may also be novelty after purchase),
or if the machine does not start (which can also be
caused by sticking of the actuator system on the
motor base.
Care & maintenance.
4 Place the work bowl on top
of the motor base, and turn it
clockwise to lock it in place.
NOTE: The bowl must be
locked securely in place, or
the motor will not run.
5 If needed, cut your food so it
will fit in the feed chute. Then
place food into the chute.
6 Turn the power control knob
to the ON position.
7 Always use the food pusher to
guide food through the feed
chute. NEVER place hands,
fingers, utensils, or any non-
food items into the feed chute.
8 When you are finished, turn
the knob to the OFF position.
9 Remove the bowl from the
base by turning it counter-
clockwise. Place bowl on
clean, dry, flat surface.
10 Remove the lid by turning it
counter-clockwise to unlock.
11 Using finger holes, carefully
remove the disc blade and
set it aside. Blade is sharp,
handle with care.
NOTE: Always use the two
larger holes (finger holes) to
handle the blade discs.
12 Pour your food ingredients
from the bowl.
WARNING: ALWAYS wait until the blade has
stopped moving before removing the lid.
WARNING: Never unload or pour food from bowl
without first removing the blade disc.
Using the blender: cup and cross blade.
WARNING: Always be extremely careful when
handling blades, as they are very sharp.
WARNING: To pick up and handle the blade discs,
always use the two larger finger holes in each
disc.
WARNING: Never submerge the motor base in
water or any other liquid.
!
1 Place the motor base on a
clean, dry, flat surface, like a
counter top.
2 Add ingredients into the
Magic Bullet cup (making
sure you do NOT exceed the
MAX line).
3 Twist on the cross blade
assembly until the cup and
the blade assembly are
sealed tight.
4
Turn the sealed cup upside
down and place onto the motor
base, turning it clockwise to
lock the cup onto base.
NOTE: The cup must be locked
securely in place, or the motor
will not run.
5 Turn the power control knob
to ON or PULSE to activate
the motor.
6 When you are finished, turn
the knob to the OFF position.
7 Remove the sealed cup from
the motor base by turning it
counter-clockwise to unlock.
8 Turn the sealed cup right
side up (blade assembly on
top), and twist o the blade
assembly. Pour and enjoy!
WARNING: Never blend hot or carbonated
ingredients, which can pressurize the sealed
cup. Always use cool or room temperature
ingredients. Never operate for more than one
minute. The friction from the rotating blade can
heat and pressurize the vessel, causing possible
separation and personal injury.
WARNING: ALWAYS wait until the blades have stopped
moving before removing the cup from the base.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magic Bullet Kitchen Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magic Bullet Kitchen Express in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 8.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info