162162
91
Zoom out
Zoom in
Previous page
1/119
Next page
Notice that in the lower right corner the size of the region is displayed. You may choose to
put large regions on an SD card to save internal memory.
Saving Map Regions. Before saving the region, review the documentation that came with
MapSend to set what information will be saved with the region. In this example, Topo
information and POIs are wanted, so in the region
list make sure that the “T” and “P” boxes to the
left of the region name are bolded. Next, mark
the region for saving by clicking the checkbox to
the left of the region name.
Save the Region to Your Computer’s Hard Drive. Under
the Regions menu, select “Upload to GPS...” (Ctrl+U).
Click on the radio button for “Save on Hard Drive.”
IMPORTANT: Do NOT save directly to an SD card or
directly to the GPS unit. Map files saved from
MapSend need to be converted before using them in
the eXplorist. Maps saved directly to an SD card from
MapSend will not work in the eXplorist.
Click the Next > button.
Enter the serial number for your eXplorist in the space
provided. This can be found on your eXplorist by
accessing the
About... screen (accessed from the main
menu). Do not use any of the Settings or Connect
buttons. Once the serial number has been entered,
click Next >. You will be asked to confirm the serial
number.
The Ready to Update window is displayed with
information about the region that you are saving. Click
on the Finish button to begin saving the region.
Note: MapSend automatically saves files to a specified location. The path to the saved files
is: Local Disk C:\Program Files\Magellan\‘MapSend Product Name’\Export\Images.
Connect the eXplorist to the Personal Computer: (This applies only if you are uploading the
detail map to the eXplorist or to an SD card installed in the eXplorist.)
Turn off the eXplorist and connect the USB cable supplied with your eXplorist to the back of
the eXplorist and a USB port on your computer. Turn the eXplorist on. The eXplorist will
come up in the USB File Transfer mode. (If not, and the Communication scr
een is displayed,
press
ENTER. Select USB File Transfer and press ENTER. Select Internal Memory or SD
Card and press
ENTER.)
Memory space in the eXplorist is very limited and it is recommended that you save detailed
maps to an SD
Card. In this example, the eXplorist has been turned on and is in the USB
File Transfer mode, but internal memory is selected. To change to the SD card, press
ENTER. Select USB File Transfer and press ENTER. Select SD Card and press ENTER.)
Using the eXplorist with MapSend
84
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magellan explorist 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magellan explorist 400 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Magellan explorist 400

Magellan explorist 400 User Manual - Dutch - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info