162160
90
Zoom out
Zoom in
Previous page
1/98
Next page
Preferences
87
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Reset Default.
5. Press ENTER.
6. Use the Arrow joystick to highlight All.
7. Confirm. Use the Arrow joystick to highlight Yes to confirm or No to cancel.
8. Press ENTER.
Alarms that you can set:
Anchor - When you set the anchor alarm on, the eXplorist will alert you
when it has moved a distance you have selected. This could be used
when you have anchored your boat and need to be alerted if it has drifted
from it’s anchor point.
Arrival - The arrival alarm alerts you when you have arrived to the
destination of each leg in your route or to a GOTO destination. You will
need to set the distance that you want to be alerted. (Arrival alarms also
use the speed you are traveling as a minor factor in computing when to
provide the alarm. If you have set the Arrival alarm to 250 feet and are
traveling at 30 mph, the alarm will sound slighting before the 250 foot
mark.)
Off Course - When a route is active, the eXplorist computes when you have moved left or right of the
plotted route. You can set a distance, left or right of the plotted route, that when you exceed this
distance you will be alerted by an alarm.
GPS Fix - The GPS fix alarm is displayed when you have lost your GPS fix for more than 20 seconds.
Proximity Alarm - The proximity alarm is very similar to the arrival alarm except that it factors in speed
at a higher level than the arrival alarm. The proximity alarm has two alerts. First, when you are
nearing the proximity alarm distance selected and second, a visual proximity alert when you are at the
distance selected.
At the bottom of the display is a field that will display information about all alarms that have been triggered
since the eXplorist was last turned on.
Note: When an alarm is displayed, press ESC to clear the alarm from the screen.
Resetting the eXplorist to Factory Defaults
Setting Alarms
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magellan explorist 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magellan explorist 210 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Magellan explorist 210

Magellan explorist 210 User Manual - Dutch - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info