Manual Macrom m2a 2000 (page 3 of 7) (English)

168438

Zoom out

Zoom in

1/7

Features

RMS Power at 4 ohm Stereo load at 14,4 volts 60 x 2 watts

RMS Power at 2 ohm Stereo load at 14,4 volts 90 x 2 watts

RMS Power at 4 ohm Bridged load at 14,4 volts 180 x 1 watts

THD (total Harmonic Distortion) < 0,1%

Frequency response (+0/-1 dB) 10 - 30,000Hz

Signal to noise ratio > 95dB

Low Input sensitivity 200-8,000mV

High Input sensitivity 1-10V

Input impedance 22k /100 ohm

Crossover type Variable 18/12 dB/octave

Crossover frequency & ﬁlter slop (High-pass) 30 to 600Hz (x1) 300 to 6,000Hz (x10)

Crossover frequency & ﬁlter slop (Low-pass) 30 to 600Hz (x1) 300 to 6,000Hz (x10)

Dimension (w * h * d) mm 244 x 54 x 190

• Two channel power ampliﬁer

• 90 x2 watts into 2 ohms load

• 60 x2 watts into 4 ohms load

• TO3P transistor on ampliﬁer stage

• Variable Low-High-Band pass x-over at 18/12dB/oct

• Multiplier x1/x10 Frequency cutting

• Adjustable x-over from 30Hz to 600Hz (x1), 300Hz to 6000Hz (x10)

• Stereo/Mono mode selector (ST/mono Out)

• PWM Mos-Fet power supply

• High level Input (booster In)

• Mos-Fet power sup

Technical data

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Macrom m2a 2000 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Macrom m2a 2000 Manual

Product: