GB-15
There are three ways to tune in a station upwards
automatically as below:
press >> button on the remote control;
press >>I button on the panel;
touch on > button on the touch screen.
2.1 Manual Tuning
There are three ways to tune in a station downwards
manually as below:
press and hold << button on the remote control;
press and hold I<< button on the panel;
touch on < button on the touch screen.
There are three ways to tune in a station upwards
automatically as below:
press and hold >> button on the remote control;
press and hold >>I button on the panel;
touch and hold on > button on the touch screen.
3. Recalling a preset station
A total of 30 preset stations (18-FM, 12-MW) are
available in memory.
Press I<< / >>I button on the remote control OR press
AMS button to recall a preset station.
The display shows the preset number and frequency of
the stored station; touch one of these to select a
corresponding station.
Note: Press any one of the station preset buttons on the
remote control also to select the preset stations.
4. Store stations
4.1 Auto store
It is a function for storing up to 6 stations.
Follow the two steps:
Select the desired band;
hold down AMS button, the stations with
good reception are stored automatically.
4.2 Manual store
To turn in a station to be stored in the preset memory,
press and hold any one of the preset buttons (1-6) to
store on.
*If a new station will be stored in a preset memory which
already has a station, the current station will be cleared
and replaced by the new station.
5.DX/LOC Selector
In radio mode, press LOC button on the remote control
to select strong or weak station reception.
5.1 LOC
When LOC displays on the touch screen, only strong
signal stations will be tuned.
5.2 DX
When there is no LOC displays on the touch screen,
both strong and weak stations can be received.
Note: The initial mode is DX mode.
6. MO/ST Selector
In FM of radio mode, you can press ST button on the
remote control to select Mono mode or Stereo mode.
7. EXACT STATION SELECTION
7.1 Press number buttons (1-6) on the remote control to
