494079
22
Zoom out
Zoom in
Previous page
1/28
Next page
21
Note : Use only the contents of this package to install and use the system.
Using accessories not provided with this player may damage the player.
Mounting and Wiring precautions
z This unit is exclusively for vehicles with a negative ground, 12V power
supply.
z This unit may be installed with additional mobile audio components, such
as a digital camera.
z Always use great care when attaching anything to a vehicle. Check
clearances on both sides of the planned installation before drilling any
holes or installing any screws.
z A good chassis ground connection is critical to minimize resistance and
avoid noise problems. Use the shortest wire possible and securely
connect it to the car chassis.
z When routing RCA cables, keep them away from the power cables and
output speaker wires, engine, exhaust system, ect. Heat may damage
wires.
z If the fuse should blow, make sure that all connections are correct, the
cables have not caused a short circuit, and no wires are damaged. Then
replace the fuse with a new fuse of the same amperage value as the
original fuse. When replacing a fuse, never let the power cable touch any
metal part or other wire.
z Never let disconnected cables or terminals touch metal on the car or any
other conducting material.
z To prevent short circuit, do not remove the caps from unused terminals or
from the ends of unconnected cables.
z Insulate unconnected wires with vinyl tape or other similar material.
W
arning!
To prevent short circuits during installation, disconnect the vehicle’s negative
battery lead before making any power connections.
Installation procedure
1. Screw the Installation Bracket to the beam or plywood using the ST4.2x16
screws.
2.
Installing the trim ring on the player using the TB 2.6x6 screws .
3. Plug in power harness and audio/video source cablesinto the overhead
monitor .
4.
Attach the player to the Installation Bracket using the PM4x8 .
5. Check the car’s brake lights, blinkers, w iper, etc. to ensure they are
working property
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom M-DVD1023RV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom M-DVD1023RV in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info