494089

Macrom 44.05 Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
MACROM INGLESE 44.05/07 14 OTTOBRE 1992 13
SETTINGS AND SELECTORS
13
+
-
+
-
-+
A B
E
4CH 3CH 2CH
LOW PASS
HIGH PASS
ONOFF
ONOFF
OUTPUT
INPUT
2CH4CH
+
-
+
-
-+
C D
F
C
D
A / E
B / F
GAIN
CONTROL
0.5V
0.1V
2 V
GAIN
CONTROL
0.5V
0.1V
2 V
LEFT
BY-PASS
OUTPUT MODE SELECTOR WITH 2 INPUT CHANNELS AND A BY-PASS OUTPUT
a) "2CH
INPUT" "4CH OUTPUT" MODE: As your head unit is equipped with only two pre-amplified
outputs select the position “2CH” and connect the outputs to the amplifier inputs marked with the
letters A / E (left) and B / F (right). Then select the position "4CH" in order to have 4 output
channels, A, B, C and D, respectively, to drive 4 speakers. You can then activate (ON) the
different sections of the built-in electronic crossover to obtain the High-Pass outputs A and B and/
or the Low-Pass outputs C and D.
NOTE: In case a preamplified output is needed to control another amplifier, the RCA-connectors
C and D marked BY-PASS and carrying a unitary gain output signal can be used.
The By-Pass output is active only with the "2CH
INPUT" configuration.
IMPORTANT NOTE: Both input sensitivity adjustments are activated and operate independently
on the respective outputs.
+
-
+
-
-+
A B
E
4CH 3CH 2CH
LOW PASS
HIGH PASS
ONOFF
ONOFF
OUTPUT
INPUT
2CH4CH
+
-
+
-
-+
C D
F
C
D
A / E
B / F
GAIN
CONTROL
0.5V
0.1V
2 V
GAIN
CONTROL
0.5V
0.1V
2 V
LEFT RIGHT
b) "2CH INPUT" "3CH OUTPUT" MODE: This configuration uses a single 44.05/44.07 amplifier as a
multi-amplifying system. There are 3 output channels, 2 stereo channels A and B, and a third
channel F with a single bridged mono signal.
In case you want to use the built-in electronic crossover, the outputs A and B can be connected
to medium-high speaker systems by placing the High-Pass selector in the ON position , whereas
by placing the Low-Pass selector in the position ON a woofer system or a powerful subwoofer
can be connected to the mono output F.
IMPORTANT NOTE: Both input sensitivity adjustments are activated and operate independently
on the respective outputs.
+
-+-
-
+
A B
E
4CH 3CH 2CH
LOW PASS
HIGH PASS
ONOFF
ONOFF
OUTPUT
INPUT
2CH4CH
+
-+-
-
+
C D
F
C
D
A / E
B / F
GAIN
CONTROL
0.5V
0.1V
2 V
GAIN
CONTROL
0.5V
0.1V
2 V
LEFT RIGHT
c) "2CH INPUT" "2CH OUTPUT MODE: This configuration uses the amplifier as a traditional and
powerful 2-channel stereo system with the output channels E and F.
On activating the built-in electronic crossover, Low-Pass ON with this configuration, only the low
frequencies are output for driving two powerful subwoofers.
IMPORTANT NOTE: With this configuration only one of the two input sensitivity controls (the
right one) is activated for the adjustment of the signal at the E (left) outputs.
BY-PASS
BY-PASS
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom 44.05 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom 44.05 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info