166339
7
Zoom out
Zoom in
Previous page
1/35
Next page
++
+
C
A B
++
+
C
A B
++
+
C
A B
LEFT LEFT RIGHTRIGHT
MONO MONO
8
CONNECTIONS
CONNECTIONS
1. Battery lead: Connect the BATT-terminal
11 directly to the car‘s battery with a yellow lead of
adequate section.
Do not connect this lead to circuits existing within the electric system of the car. In order to avoid
damage to the car it is imperative that this lead be fitted with a fuse (not provided) as near as
possible to the car‘s battery. This connection is the to be carried out last.
2. Remote switch-on lead: Connect the (REMOTE) switch-on lead or the control lead of the
power antenna coming from the head unit (blue) to the REMOTE terminal
13 of the amplifier.
NOTE: In case this lead is not connected, the amplifier will not be switched on when the head
unit is switched on. If your head unit is not fitted with an output connector for a power antenna,
a quick-break lever switch (SPST) shall be installed between the power source (+12 V) and the
remote switch-on lead and connected to the REMOTE terminal
13 so as to provide for manual
switch-on of the amplifier.
3. Ground lead: Connect a ground lead (black) of adequate section to a clean spot on the car
chassis and to the GND terminal
12 . Make sure that the connection is sound and that there is
electric continuity between this spot and the negative terminal of the battery. Use a ground cable
as short as possible, and in case more than one amplifier are used connect all ground leads to
the same spot.
4. FUSE: In case of fuse replacement make sure to replace them with fuses of the same
amperage. The use of fuses with the wrong amperage may seriously damage the components
of the unit.
5. Speaker output terminals: Make sure to keep the right polarity and phase in connecting the
speakers. This includes the control of the right polarity, (+ and -).
NOTE: Never connect the negative wires to each other and never use a common negative lead
for all the speaker.
Take care that inadequately isolated wires do not come into contact with the the ground, metallic
parts of the car or with each other.
3-channel configuration 2-channel configuration 1-channel configuration
6. RCA-type input connectors: Connect the Pre output leads of your head unit to the RCA-type
input connectors by means of RCA extension cables (e.g. 90.05-90.10-90.25-90.50 by
MACROM).
Make sure to respect the right channel designation: left L (white) and right R (red).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom 4305 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom 4305 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info