584628
5
Zoom out
Zoom in
Previous page
1/20
Next page
5
QUICK START
1. Start with the following settings on the front of the
SRM150:
MAIN LEVEL [6] control down.
PHANTOM POWER [5] switch out (unless you are
using condenser microphones).
INSTRUMENT [4] switch out (unless you have an
electric guitar connected to channel 1).
Channels 1-3 gain [3] controls down.
EQ [7] controls centered.
And on the rear panel:
Turn the POWER [8] switch off (down).
MIC/LINE [12] switch out.
WARNING: Turn the MAIN LEVEL
[6]control down (counterclockwise)
before every use. If not, you could be
in for a startling surprise, especially
if the last time you used it was with
a microphone and now you want to
connect a line-level source.
2. Connect the output from your signal source (mixing
console, microphone, preamp, or other mic- or line-
level source) directly to the MIC/LINE [1] combo
connector on the front of the SRM150. It accepts
balanced line-level signals from mixers, preamplifi-
ers, CD players, tape decks, etc., and accepts direct
connections from microphones. Channel 3 has ste-
reo RCA jacks [2] specically for a stereo line-level
input from a tape deck or CD player.
3. Connect the supplied AC power cord to the AC
power receptacle [10] on the back of the SRM150.
Plug the other end into an AC outlet properly con-
figured with the correct voltage for your particular
model. (The SRM150 has a universal power supply
that accepts an AC mains voltage ranging from 100V
to 240 V.)
4. Turn on your signal source. Make sure its Master
Volume control (if it has one) is turned all the way
down.
5. Turn on the SRM150 POWER [8] switch.
6. Start the signal source, whether it be speaking into
a microphone, playing a guitar, or starting a CD
player. Adjust any volume controls on the signal
source for normal operation.
7. Turn up the MAIN LEVEL [6] control about halfway
(12 o’clock).
8. Slowly turn up the gain [3] controls for the input
channels until the desired volume is reached.
9. If it gets really loud, really fast, try turning down
the MAIN LEVEL control (or the input source
volume control, if it has one).
If it doesn’t get very loud, even with the input chan-
nel gain control all the way up, try turning up the
MAIN LEVEL control (or the input source volume
control, if it has one).
10. If there is no sound, always turn down the SRM150
MAIN LEVEL control before investigating. There
may be a mixer or preamplifier mute or tape switch
engaged, or a mic switch off.
THRU
POWER
FUSE
MAIN IN
LINE
MIC
3
A
M
P
SRM150
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mackie SRM 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mackie SRM 150 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info