606032
6
Zoom out
Zoom in
Previous page
1/22
Next page
6
403002-04-05-07-08-09-10_en_ma_2011
TECHNICAL DESCRIPTION AND
PROPOSED CONDITIONS OF USE
GENERAL DESCRIPTION
The machine is essentially made of a base supporting a circular blade mounted in tilted
position. This blade is driven by an electrical motor to slice foodstuffs. The machine is
equipped with a carriage holding a product tray and sliding on tracks mounted under the
base top, parallel to the blade.
Slice thickness is adjusted by means of a
gauge plate mounted in front of the blade. This
plate, against which rests the product to be sliced is moved transversally with respect to
the blade by a value corresponding to the desired slice thickness. The product is fed to
the machine (towards the gauge plate) by gravity.
All the machine components are made of polished and anodically oxidized aluminium
alloy, of stainless steel and food grade plastic mater
ial.
The blade is driven by an electrical motor, transmission is by means of a longitudinally
grooved belt.
The machine is started and stopped by a control button provided with auxiliary circuit
preventing accidental restarts after an outage.
Some of the machine models have a user-friendly and safe built-in blade sharpener.
MECHANICAL AND ELECTRICAL SAFETY DEVICES
The following mechanical safety devices were installed:
A series of aluminium and transparent plastic guards on the product carriage.
The following electrical safety devices were installed:
Start/stop button system requiring a voluntary restart of the machine in the
case of an outage or interruption of the power supply.
Safety micro-switch preventing the motor from starting when the blade guard
is removed (not available on the 403.008 machine).
WARNING: RESIDUAL RISKS
Notwithstanding all the possible cautions taken during the design and the
construction of the machine, residual risks (cutting) still exist during use or during
cleaning or maintenance. Therefore be careful and PAY THE UTMOST ATTENTION
to what you are doing.
DO NOT use the machine if you are
not in perfect psychological and physical
conditions. DO NOT ALLOW anyone near the machine when it is in use. ALWAYS
wear gloves that can resist cuts or tears when cleaning, lubricating or sharpening
the blade.
Slice only the products mentioned as sliceable. NEVER try to slice products that
have been mentioned as non sliceable.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mach 403.007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mach 403.007 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info