782325
53
Zoom out
Zoom in
Previous page
1/60
Next page
Trouble shooting
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section.
In most cases the problem can be solved quickly.
In more detail…
In more detail…
Trouble shooting
MSTS1500-A by MacAllister
53
EN
WARNING! Only perform the steps described within these
instructions! All further inspection, maintenance and repair work
must be performed by an authorised service centre or a similarly
qualified specialist if you cannot solve the problem yourself!
Problem Possible cause Solution
Motor not running. 1. No mains voltage.
2. Undervoltage relay
triggered by temporary
loss of power.
3. Motor overheated.
1. Check cable, plug,
socket and fuse.
2. Switch device on again.
3. Eliminate cause of the
overheating, let cool
down for a few minutes,
then switch on again.
Blade makes poor
cuts.
1. Blade is dull or dirty.
2. Blade is the wrong type
for cut being made.
3. Blade is mounted
backwards.
1. Clean, sharpen or
replace the blade.
2. Replace with the proper
type.
3. Remount the blade.
Excess vibration. 1. Blade is out of balance.
2. Blade is damaged.
3. Saw is not mounted
securely.
4. Work surface is uneven.
5. Blade is warped.
1. Replace blade.
2. Replace blade.
3. Tighten all hardware.
4. Reposition on flat
surface.
5. Replace blade.
bevel adjusting
handwheel is hard
to turn.
1. Gear and screw post
inside the cabinet are
clogged with sawdust.
1. Clean the gear and
screw post.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSTS1500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSTS1500-A in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info