782325
48
Zoom out
Zoom in
Previous page
1/60
Next page
To replace the saw blade
When you need replace the saw blade, please follow the procedure as belowing:
> Unplug the saw.
> Unlock the locking knob and remove the blade guard.
> Turn the bevel adjusting handwheel to set the saw blade to 0° and lock the
bevel locking handle, then turn height adjusting handle clockwise to drop the
saw blade to lowest position.
> Loosen the six cross-screws and remove the table insert.
> Turn height adjusting handle counterclockwise to raise blade to maximum height.
> Using one opened-ended blade wrench [26], place the flat open end on the flats
on the outer blade flange [71].
> Using the other opened-ended blade wrench [26], place the flat open end on the
flats on the arbor nut [72]. Holding both wrenches firmly, pull the opened-ended
blade wrench [26] on the arbor nut forward to the front rail side of the machine.
> Remove arbor nut [72], outer blade flange [71] and saw blade [23].
> Place one new blade [23] on arbor shaft [73]. Make sure saw blade teeth point
down at the front rail side of saw table. Place outer flange [71] and arbor nut [72]
on arbor shaft and verify that large, flat surface of the outer flange faces the saw
blade and the saw blade [2] is firmly seated aganist the inner flange [74]. And
the flats on the outer flange are aligned with the flats on arbor shaft.
> Use blade wrenches to tighten nut securely. Do not overtighten.
Lubrication
> All motor bearings are permanently lubricated at the factory, and do not require
any additional lubrication.
> Use graphite or silicone to lubricate all mechanical parts of the table saw where
a pivot or threaded rod is present.
48
Care and maintenance
MSTS1500-A by MacAllister
In more detail…
EN
WARNING! Be extremely careful when loosening arbor nut.
Keep firm grasp on both wrenches. Do not allow hands to slip
and contact blade.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSTS1500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSTS1500-A in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info