782325
28
Zoom out
Zoom in
Previous page
1/60
Next page
3
52
53
54
55
52
14
28
Before you start
MSTS1500-A by MacAllister
Getting started...
EN
Fig. 5
To assemble the blade guard
> Pull out and hold locking knob [52], align the pin [53] of the blade guard [14] with
the hole [54] of the riving knife [3].
> Press the blade guard [14] down and release the locking knob [52] to insert the
pin [53] into hole [54] on the riving kinfe [3] to lock the blade guard [14] in place.
Ensure the pin [55] is located at inner side of the blade guard.
> Ensure the blade guard rests on the working table but will lift when a work piece
is pushed into the working table.
WARNING: Risk of injury!
The saw blade guard [14] must be in position at all times
to prevent contact with the saw blade. It should lift up and onto
the work piece when the work piece is passed through the saw.
WARNING: The blade guard should return to its rest position after
the work piece has been cut.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSTS1500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSTS1500-A in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info