782323
26
Zoom out
Zoom in
Previous page
1/42
Next page
26
MSPS1200 by MACAllister Product functions
Mitre cut (Up to 48°)
1. First loosen the front and rear bevel lock knobs (4 and 12) and swivel the plunge
saw to the desired graduation. Tighten the both bevel lock knobs again.
(Refer to page 15 "Set cutting angle” section)
2. Set the desired plunge depth. Ensure that the guide rail track compensation (15)
is in up position when using the saw without track.
(Refer to page 13“Set cutting depth” section)
3. To switch the saw on press the plunge lock button (1) and the ON/OFF switch (2).
Allow the blade to reach full speed, plunge the blade to your set depth.
Guide the saw forward to cut.
4. After completing the cut, release the ON/OFF switch and allow the blade to come
to a complete stop before removing the saw from the workpiece.
1
2
15
Fig. 17
NOTE : The cutting width indicators(22) show the cutting path for 90°
and 45° mitre cuts.
In more detail...
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSPS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSPS1200 in the language / languages: English as an attachment in your email.

The manual is 3.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info