782329

Mac Allister MLMP300HP46 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
55
CAUTION! Do not touch rotating cutting device.
• Engine brake (brake bar): Use the brake bar (2) to stop the engine. When you release the bar the engine and the blade stop
automatically in a few second. To mow, hold the bar in the working position. Before you start to mow, check the brake bar several
time to be sure that it is working properly. Ensure that the brake wire can be smoothly operated.
03
Operation
• Do not operate the engine in a conned space where dangerous carbon monoxide fumes can collect.
• Mow only in daylight or in good articial light
• Do not operate the product while being tired, ill or under inuence of alcohol or other drugs.
• Avoid operating the product wet grass, where feasible.
• Always be sure of your footing on slopes.
• Walk, never run.
• Mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
• Do not mow excessively steep slopes near drop-offs, ditches or embankments.
• Avoid using the product in bad weather conditions especially when there is a risk of lightning.
• Use extreme caution when reversing or pulling the product towards you.
• Stop the cutting device(s) if the product has to be tilted for transportation when crossing surfaces other than grass, and when
transporting the product to and from the area to be mowed.
• Never operate the product with defective guards, or without safety devices, for example deectors and/or grass catchers, in place.
• Do not change the engine governor settings or overspeed the engine.
• Do not alter or tamper with any sealed adjustments for the engine speed control.
• Do not tamper or disable any lawnmower safety systems or features.
• Ensure and regularly check that all starting interlocks and operator presence controls are properly functioning.
• Stop the product according to instructions in this manual before leaving the operator’s position and park it.
• Disengage all cutting device(s) and drive clutches before starting the engine.
• Start the engine or switch on the engine carefully according to instructions and with feet well away from the cutting devices(s).
• Do not tilt the product when starting the engine or switching on the engine, except if the product has to be tilted for starting. In this
case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator.
• Do not start the engine when standing in front of the discharge chute.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Never pick up or carry a product while the engine is running.
• Stop the engine and disconnect the spark plug connector, make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• before clearing boxes
• before checking, cleaning or working on the product
• after striking a foreign object. Inspect the product for damage and make repairs before restarting and operating
the product,
• if the product starts to vibrate abnormally (check immediately).
• Stop the engine and disconnect the spark plug connector, make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• whenever you leave the product,
• before refuelling
• Reduce the throttle setting during engine shut down and if the engine is provided with a shut-off valve, turn the fuel off at the
conclusion of mowing.
• Go slow when using a trailing seat.
• Never touch the exhaust, exhaust guard or cooling ns when the engine is hot.
• Never carelessly touch the product, you can burn yourself. While the product is in operation or shortly thereafter, its parts such as
the exhaust pipe, engine, and other surfaces are extremely hot! Pay attention to the markings on the product.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MLMP300HP46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MLMP300HP46 in the language / languages: English as an attachment in your email.

The manual is 7.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info