647913
25
Zoom out
Zoom in
Previous page
1/82
Next page
24 MT-700
6.3 Working Channel Recall
Rather than using the
SELECT/ENT
knob or microphone keys to change channels, this
feature allows quick switching between the last working channel and the current
primary channel.
To quickly switch between the last working channel and the Primary Calling Channel:
Use the
SELECT/ENT
knob or microphone keys to select a working channel, such
as channel 68.
Press the
key momentarily. The current primary channel number
appears in the channel number display.
Press the
key again momentarily. The working channel number
appears in the display. Each time the key is pressed, channel selection toggles
between the primary channel and the working channel.
6.4 Transmitter Power Setting
The transmitter has two power settings, 25 watts or 1 watt, which are indicated by
HI
or
LO
appearing in the upper line of the display. The normal power setting is
HI
for
all channels where 25 watts is allowed. Use the 1 watt setting for communication
with nearby vessels (bridge-to-bridge) or facilities (drawbridges).
Press the
key to toggle transmitter power between 25 watts and 1 watt
output.
SPECIAL NOTE
Channels 15, 17, 75 and 76 are restricted to 1 watt maximum power and will cause the
error beep if the
HI/LO
key is pressed.
6.5 Channel Scanning
There are three channel scanning modes; Priority Scan, All Scan and Memory Scan.
In the Priority Scan mode, Channel 16 is checked for activity every 2 seconds, even if,
the scan is halted by traffic on a working channel. When scanning is halted by traffic,
the scan pauses while the channel is active. Scanning resumes, after a brief delay
when the channel is clear. If the
PTT
is pressed, in reply to a received signal, scanning
is cancelled.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-tech MT-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-tech MT-700 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info