647913
14
Zoom out
Zoom in
Previous page
1/82
Next page
MT-700 13
Plastic mount
block (Side)
Fig. 1
Bolt foot
Longer screw
Shorter screw
Washer
Fig. 2
Plastic mount
block (Top)
(+) Screw driver
Fig. 3
Fig. 4
FM-03 Flush Mount Kit Installation
1. Cut the dash board using a template sheet.
2. Set the transceiver in the cut dash board.
3. Rotating the longer screw and set it to the each hole of the plastic mount block.
Firmly attach the bolt foot rotating to the top of the each screw. (See Fig. 1)
4. Firmly fix the plastic mount block on the either side of the transceiver using shorter
screw. Don’t forget to attach the washer. (See Fig. 2 and Fig. 3)
5. Fasten the each longer screw to fix the transceiver to the dash board firmly. (Fig. 4)
6. The same works should be done to the other side too.
4.2 Antenna
Proper installation of a quality VHF antenna is very important to reliable radio
communication. A good quality unity gain antenna is recommended for maximum
range performance. In general, antennas should be located as high as practical and
separated as much as possible from other antennas and structures. The minimum
distance to other objects is 1 meter. Route the antenna cable away from other
electronic equipment and do not bundle the antenna or power cable with other wiring,
especially transducer cables for depth sounders and fish finders. For cables longer
than 10 meters, RG-8/U coaxial cable must be used. Mount the antenna and install
the connector(s) in accordance with manufacturer’s instructions. Connect the
antenna cable to the RF output connector on the rear panel of the transceiver.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-tech MT-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-tech MT-700 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info