522705
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
They produce good results for certain types
of usage only. If you are using this type of
detergents, you need to contact the manu-
facturers and find out about the suitable con-
ditions of use.
When the conditions of use of such products
and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid
consumption.
Contact the detergent manufacturers if you
are not obtaining good wash results (if your
dishes stay calcareous and wet) after having
used 2 in 1 or 3 in 1 detergents. The scope
of warranty for your machine does not cover
any complaints caused by the use of these
types of detergents.
Recommended usage: If you want to obtain bet-
ter results while using combined detergents,
add salt and rinse aid into your machine and ad-
just the water hardness setting and the rinse
aid setting to the lowest position.
Solubility of the tablet detergents
produced by different companies can
vary depending on the temperature
and time. Therefore, it is not recommended
to use such detergents in short programs. It
is more suitable to use powder detergents in
such programs.
Warning: Should any problem, which you have
not encountered before, arise with the use of
this type of detergents, contact the detergent
manufacturers directly.
When you give up using combined detergents
Fill the salt and rinse aid compartments.
Adjust the water hardness setting to the hi-
ghest position and run an empty-wash.
Adjust the water hardness level.
Make the suitable rinse aid setting.
Filling with rinse aid and making the setting
Rinse aid is used to prevent the stay of white
water drops, lime stains, white film stripsha-
ped stains that may form on the dishes, as well
as to increase the drying performance. Contra-
ry to the popular beliefs, it is used not only for
obtaining shinier dishes but also for obtaining
sufciently dried dishes. For this reason, care
should be taken that there is adequate amount
of rinse aid in the rinse aid compartment and
only polishing material produced for use at dis-
hwashers should be used.
To put rinse aid, re-
move the rinse aid
compartment cap by
turning it. 1 Fill the
rinse aid compart-
ment with rinse aid
until the rinse aid le-
vel indicator becomes dark; 2 refit the cap and
close it by turning
it in a way that the
nails will correspond
to one another. By
checking the rinse
aid level indicator
on the detergent
dispenser, you can understand whether or not
your machine needs rinse aid. A dark indicator
b means that there is rinse aid in the compart-
ment, while a light indicator a shows that you
need to fill the compartment with rinse aid.
The rinse aid level adjuster can be set to a posi-
tion between 1 and 6. Factory setting for rinse
aid is the position 3.
You need to incre-
ase the degree of
the adjuster if wa-
ter stains form on
your dishes after a
wash, whereas you
need to decrease
the degree if a blue
stain is left when wiped by hand. 3
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MVW-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MVW-600 in the language / languages: English, German as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-System MVW-600

M-System MVW-600 User Manual - Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info