522705
34
Zoom out
Zoom in
Previous page
1/52
Next page
34
Installing the machine
Positioning the machine
When determining the place to put your ma-
chine on, take care to choose a place where you
can easily load and unload your dishes.
Do not put your machine in any location where
there is the probability for the room tempera-
ture to fall below 0°C.
Before positioning, take the machine out of its
packaging by following the warnings located on
the package.
Position the machine close to a water tap or
drain. You need to site your machine, taking
into consideration that its connections will not
be altered once they are made.
Do not grip the machine by its door or panel in
order to move it.
Take care to leave a certain clearance from all
sides of the machine so that you can comforta-
bly move it back and forth during cleaning.
Make sure that the water inlet and outlet ho-
ses do not get squeezed while positioning the
machine.
Also, make sure that the machine does not
stand on the electrical cable.
Adjust the machine’s adjustable feet so that it
can stand level and balanced. Proper positio-
ning of the machine ensures problem-free ope-
ning and closing of its door.
If the door of your machine does not close pro-
perly, check if the machine is stable on the floor
it stands; if not, adjust the adjustable feet and
ensure its stable position.
Water connection
Be sure that the indoor plumbing is suitable for
installing a dishwasher. Also, we recommend
that you t a filter at the entrance of your place
or apartment so as to avoid any damage to
your machine because of any contamination
(sand, clay, rust etc.) that might be occasion-
ally carried in through the mains water supply
or the indoor plumbing, and to forestall such
complaints as yellowing and formation of depo-
sits after washing.
Water inlet hose
Do not use the water
inlet hose of your old
machine, if any. Use the
new water inlet hose
supplied with your ma-
chine instead. If you are
going to connect a new
or long-unused water in-
let hose to your machine,
run water through it for a while before making
the connection. Connect the water inlet hose
directly to the water inlet tap. The pressure
supplied by the tap should be at a minimumof
0.03 Mpa and and at a maximum of 1 Mpa. If
the water pressure is above 1 Mpa, a pressu-
re-relief valve should be fitted in between.
After the connections are made, the tap should
be turned on fully and checked for water tight-
ness.
For the safety of your machine, make sure to
always turn off the water inlet tap after each
wash programme is finished.
NOTE: Aquastop water spout is used in some
models. In case of using Aquastop, a dange-
rous tension exists. Do not cut Aquastop water
spout. Do not let it get folded or twisted.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MVW-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MVW-600 in the language / languages: English, German as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-System MVW-600

M-System MVW-600 User Manual - Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info