680045
15
Zoom out
Zoom in
Previous page
1/27
Next page
They produce good results for certain types of usage only. If you are using this type of
detergents, y
ou need to contact the manufacturers and find out about the suitable
conditions of use.
When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergents.
Recommended usage: If you want to obtain better results while using combined detergents,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid
setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary depending
on the temperature and time. Therefore, it is not recommended to use such detergents
in short programs. It is more suitable to use powder detergents in such programs.
Warning: Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
When you give up using combined detergents
Fill the salt and rinse aid compartments.
Adjust the water hardness setting to the highest position and run an empty-wash.
Adjust the water hardness level.
Make the suitable rinse aid setting.
Filling with rinse aid and making the setting.
Rinse aid is used to prevent the stay of white water drops, lime stains, white film strip-
shaped stains that may form on the dishes, as well as to increase
the drying performance. Contrary to the popular beliefs, it is used
not only for obtaining shinier dishes but also for obtaining sufficiently
dried dishes. For this reason, care
should be taken that there is adequate
amount of rinse aid in the rinse aid
compartment and only polishing
material produced for use at
dishwashers should be used.
To put rinse aid, remove the rinse aid
compartment cap by turning it.1 Fill the rins
e aid compartment with
rinse aid until the rinse aid level indicator becomes dark;2 refit the
cap and close it by turning it in a way
that the nails will correspond to one
another. By checking the rinse aid level indicator on the detergent
dispenser, you can understand whether or not your machine
needs rinse aid. A dark indicator b means that there is rinse aid in
the compartment, while a light indicator a shows that yo
u need to
fill the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and
6. Factory setting for rinse aid is the position 3.
You need to increase the degree of the adjuster if water stains
form on your dishes after a wash, whereas you need to decrease the degree if a blue
stain is left when wiped by hand.3
14
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MVD460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MVD460 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-System MVD460

M-System MVD460 User Manual - German - 28 pages

M-System MVD460 User Manual - Dutch - 27 pages

M-System MVD460 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info