Fig. 3.6Fig. 3.5
AUTOMATIC OVEN COOKING
To cook food automatically in the oven,
it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven
cooking program.
These operations are done in the follow-
ing way:
1. Set the length of the cooking time by
pushing the button and the
button to advance, or to go back
if you have passed the desired time
(fig. 3.5). The AUTO and the sym-
bol will be on.
2. Set the end of the cooking time by
pressing the button (the cooking
time already added to the clock time
will appear), and the button (fig.
2.6); if you pass the desired time you
may get back by pushing the but-
ton.
After this setting, the symbol will
go off. If after this setting, the AUTO
flash on the panel and a buzzer gives
off, it means there was an error in the
programming, that is that the cooking
cycle has been superimposed on the
clock. In this case, modify the end of
cooking time or the cooking time itself
by following again the above men-
tioned instructions.
3. Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specific
chapters).
Now the oven is programmed and every-
thing will work automatically, that is the
oven will turn on at the right moment to
end the cooking at the established hour.
During cooking, the symbol remains
on.
By pushing the button you can see
the time that remains until the end of
cooking.
The cooking program may be can-
celled in any moment by pushing .
At the end of the cooking time the oven
will turn off automatically, the symbol
will turn off, AUTO will flash and a buz-
zer will be released, which can be
turned off by pushing any of the bot-
tons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “man-
ual” by pressing the button.
Attention: An energy blackout makes
the clock go to zero and cancels the set
programs.
After a blackout, three zeros will flash
on the panel.
