522545

M-System MI-91 Manual

52
Zoom out
Zoom in
Previous page
1/60
Next page
52
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time:
Action Control panel Display
To select a heating zone Press on key [ + ] [ 4 ]
To select the power level Press on key [ + ] or [ - ] [ 1 ] to [ 9 ]
To select the « Timer » Press on timer key [ - ] and [ + ] timer control light is on
simultaneously until the
desired heating zone.
Decrease the time Press on timer key [ - ] [30] wents to 29,28..
Increase the time Press on timer key [ + ] the time increases…
The time is confirmed and the cooking starts until the time reaches [ 00 ].
To stop the cooking time:
Action Control panel Display
To select the « Timer » Press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone The time displays
To stop the « Timer » Press on timer key [ - ] displays [01]
Press second time on timer key [ - ] displays [00]
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press the key [ - ] or [ + ] from the timer.
Egg timer function:
Action Control panel Display
To start: Touch the key [ 0/I ] [ 0 ]
To select the “Egg Timer” Press once on timer key
[ - ] and [ + ] simultaneously The time displays
Decrease the time Press on timer key [ - ] [30] wents to 29,28,27,
Increase the time Press on timer key [ + ] the time increases…
When the time reaches [00] it is blinking and beeping.
Function “keep warm”
This function of maintenance to the heat makes it possible to reach and maintain automatically a
temperature of 42°C and 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
To engage, to start the function “ keep warm “
Action Control panel Display
To engage 42°C Press [ U ] key keep warm control light
is on
To engage 70°C Press [ U ] key 2 times keep warm control light
is blinking
To select the desired Press key [ + ] or [ - ] [ u ] or [ U ]
from the heating zone
To stop the function Press key [ + ] or [ - ] [ 0 ] to [ 9 ]
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the “keep warm” function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MI-91 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MI-91 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info