Manual M-System MI-90 (page 50 of 60) (English, German, Dutch, French)

522558

Zoom out

Zoom in

1/60

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories

brought out by the electronic system reach a certain level. The ventilation starts his high speed

when the hob is intensively used. The cooling fan reduces his speed and stops automatically

when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent

which risks causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a variable

electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the

pan. The result is a heating-up of the pan located on the heating zone.

Of course the pan has to be adapted:

 All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron

and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…

 Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware…

The induction heating zone adapts automatically the size of the pan. With a too small diameter

the pan doesn’t work. This diameter is varying in function of the heating zone diameter.

If the pan is not adapted to the induction hob the display will show [ U

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger

presses the key, the corresponding command is activated. This activation is validated by a

control light, a letter or a number in the display and/or a “beep” sound.

In the case of a general use press only one key at the same time.

Starting-up

You must first switching on the hob, then the heating zone:

 Start-up/ switch off the hob:

Action Control panel Display

To start Press key [ 0/I ] [ 0 ]

Touch the key Press key [ 0/I ] Nothing or [ H ]

 Start-up/ switch off a heating zone:

Action

Control panel Display

Zone selection Press selection key from the zone [ 0 ]

Increase power Press key [ + ] [ 1 ] to [ 9 ]

Decrease power Press key [ - ] [ 9 ] to [ 1 ]

Stop Press key [ - ] [ 0 ] or [ H ]

If no action is made within 20 second the electronics returns in waiting position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MI-90 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MI-90 Manual

Product: