Manual M-System MFTD-96IX (page 215 of 224) (English, German, Dutch, French, Spanish)

522602

215

Zoom out

Zoom in

1/224

215

Fig. 9.1

9 - GAS SECTION

The walls adjacent to the cooker

must be of material resistant to heat.

GAS CONNECTION

The connection must be executed by a

qualified tecnician according to the

relevant standards.

The appliance is predisposed and

calibrated to operate with the gas

indicated on the specifications plate.

Ensure that the room in which the cook-

er is to be installed is adequately venti-

lated, in compliance with applicable reg-

ulations.

Connection to the gas supply pipe or

gas cylinder must be made in accor-

dance with the requirements of the

applicable regulations.

The gas supply is connected at the rear

of the cooker (fig. 9.1) to the R or L ter-

minal of the gas inlet pipe; the connec-

tion pipe must not cross the rear of the

appliance.

The terminal not used must be closed

off with the plug T and gasket.

Before installation, make sure that

the local distribution conditions

(type of gas and its pressure) and

the adjustment of this appliance are

compatible. The appliance adjust-

ment conditions are given on the

plate or the label.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MFTD-96IX in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MFTD-96IX Manual

Product: