Manual M-System MFTD-106 (page 244 of 248) (English, German, Dutch, French, Spanish)

522567

244

Zoom out

Zoom in

1/248

REPLACEMENT OF BURNER

INJECTORS

If the injectors are not supplied they

can be obtained from the “Service

Centre”.

Select the injectors to be replaced

according to the “Table for the choice of

the injectors”.

To replace the injectors proceed as fol-

lows:

- Remove pan supports and burners

from the cooktop.

- Using a wrench, substitute the nozzle

injectors “J” (figs. 9.11, 9.112) with

those most suitable for the kind of

gas for which it is to be used.

Gas maintenance

244

Fig. 9.11

Fig. 9.12

ADJUSTING OF THE MINIMUM OF

THE TOP BURNERS

In the minimum position the flame must

have a length of about 4 mm and must

remain lit even with a quick turn from the

maximum position to that of minimum.

The flame adjustment is done in the fol-

lowing way:

– Turn on the burner

– Turn the tap to the MINIMUM position

– Take off the knob

– With a thin screwdriver turn the screw

F until adjustment is correct (fig. 9.13).

Normally for LPG, the regulation

screw is tightened up.

Fig. 9.13

LUBRICATION OF THE GAS TAPS

In case of difficulty in the gas taps

operation, call Service.

IMPORTANT

All intervention regarding installation maintenance of the appliance must be

fulfilled with original factory parts.

The manufacturer declines any liability resulting from the non-compliance of this

obligation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MFTD-106 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 10,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MFTD-106 Manual

Product: