Manual M-System MFTD-106 (page 240 of 248) (English, German, Dutch, French, Spanish)

522567

240

Zoom out

Zoom in

1/248

The group of attachments (fig. 9.4) is

made up of:

• 1 nut “A” ( external cylindrical thread

ISO 228-1)

• 1 sealing washer “D”

• 1 conical connection “B” (internal

cylindrical thread ISO 228-1, external

conical thread ISO 7-1)

• 1 Butane/Propane Gas connector “C”.

Exception for single unit cookers

that are not built-in.

• These cookers must be connected by a

flexible elastomer hose with a built–in

undetachable mechanical nozzle. Only

use those hoses that are authorised with

the label “AGB/BGV”.

• Two types of flexible elastomer hoses:

until April 2005, there were 2 types of

flexible elastomer hoses on the market:

- the old assymetrical model, including

an end with a fixed nozzle at the side

of the cooker, and a nozzle with a

loose nut and a built-in flat sealed joint

at the side of the inside fitting (stop

cock) .

- the new symmetrical model, including

a nozzle with a loose nut at both

sides, with a built-in flat sealed joint.

This symmetrical model is the only

one that will be available after the time

limit.

When installing a new cooker, or replacing

an existing one, the symmetrical model

must always be used.

Assembly

The gas inlet on the old cookers is equip-

ped with a conical thread ISO 7-1 – and

the hose is assembled as follows:

1. apply a sealing product to the thread

on the appliance: a strip of teflon or

sealing paste for threads (colmat) plus

some acrylic wool;

2. tighten up the linking component (the

cylindrical inside thread ISO 7-1 to the

cylindrical ouside thread ISO 228-1)

with the two keys on the cooker;

3. check that the sealed joint is firmly

inserted inside the moveable connec-

tion on the elastomer hose (new

model);

4. tighten up by hand the elastomer hose

on both sides;

5. tighten up with a spanner;

6. open the stop cock and check that

there are no leaks (soap bubbles) by

smearing on a frothing product ).

Cookers must be connected using R

materials downstream from the

AGB/BGV certificated gas stop-cock,

except for single unit cookers that are

not built-in.

As a general rule, cookers are connec-

ted downstream from the gas stop-

cock, by:

• copper pipes having an appropriate

wall thickness, or;

• steel pipes, or;

• flexible R

metal pipes with AGB cer-

tification, fitted in such a way that they

will not be crushed or pulled during

use. Their bending radius must not be

less than that specified by the manu-

facturer.

Fig. 9.4

240

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MFTD-106 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 10,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MFTD-106 Manual

Product: