Manual M-System MFNTK 95 (page 172 of 176) (English, German, Dutch, French)

680043

172

Zoom out

Zoom in

1/176

172

CONNECTION OF THE POWER SUPPLY CABLE

• Unhook the terminal board cover by inserting a screwdriver into the two hooks “A”(g.

8.1).

• Unscrew the screw “D” and open completely the cable clamp “E”(gs.8.2-8.3-8.4).

• Position the U bolts “F” onto terminal board “G”(gs.8.2-8.3-8.4)accordingtothe

diagramsing.8.5.

• Connect the phase, neutral and earth wires to terminal board “G” according to the

diagramsing.8.5.

• Strain the feeder cable and block it with cable clamp “E” (by screwing screw “D”).

• Close the terminal block cover (check the two hooks “A” are correctly hooked).

IMPORTANT:ToconnectthepowersupplycableDONOTunscrewthescrewsxing

the cover plate behind the terminal block.

WARNING: If the power supply cable is damaged, it must be replaced only by an

authorised service agent in order to avoid a hazard.

Fig. 8.1

FEEDER CABLE SECTION

“TYPE H05RR-F or H05VV-F”

230 V ac 3 x 4 mm

(**)

400 V 3N ac 5 x 2,5 mm

(**)

400 V 2N ac 4 x 4 mm

(**)

(**) Connection with wall box connection.

– Diversity factor applied.

– A diversity factor may be applied to the

total loading of the appliance only by a

suitablyqualiedperson.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MFNTK 95 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MFNTK 95 Manual

Product: