680039
187
Zoom out
Zoom in
Previous page
1/196
Next page
187
The group of attachments (fig. 9.3) is
made up of:
1 nutA” ( external cylindrical thread
ISO 228-1)
•1sealingwasher“D
• 1 conical connection B” (internal
cylindrical thread ISO 228-1, external
conical thread ISO 7-1)
•1Butane/PropaneGasconnector“C”.
Exception for single unit cookers that
are not built-in.
• These cookers must be connected by
a flexible elastomer hose with a built–in
undetachable mechanical nozzle. Only use
those hoses that are authorised with the
label “AGB/BGV”.
•Twotypesofflexibleelastomerhoses:until
April 2005, there were 2 types of flexible
elastomer hoses on the market:
- the old assymetrical model, including an
end with a fixed nozzle at the side of the
cooker, and a nozzle with a loose nut
and a built-in flat sealed joint at the side
of the inside fitting (stop cock) .
- the new symmetrical model, including a
nozzle with a loose nut at both sides,
with a built-in flat sealed joint. This
symmetrical model is the only one that
will be available after the time limit.
When installing a new cooker, or replacing
an existing one, the symmetrical model must
always be used.
Assembly
The gas inlet on the old cookers is equipped
with a conical thread ISO 7-1 – and the hose
is assembled as follows:
1. apply a sealing product to the thread on
the appliance: a strip of teflon or sealing
paste for threads (colmat) plus some
acrylic wool;
2. tighten up the linking component (the
cylindrical inside thread ISO 7-1 to the
cylindrical ouside thread ISO 228-1) with
the two keys on the cooker;
3. check that the sealed joint is firmly
inserted inside the moveable connection
on the elastomer hose (new model);
4. tighten up by hand the elastomer hose on
both sides;
5. tighten up with a spanner;
6. open the stop cock and check that there
are no leaks (soap bubbles) by smearing
on a frothing product ).
Cookers must be connected using R
HT
materials downstream from the AGB/
BGV certificated gas stop-cock, except for
single unit cookers that are not built-in.
As a general rule, cookers are connected
downstream from the gas stop-cock, by:
• copper pipes having an appropriate wall
thickness, or;
•steelpipes,or;
• flexible R
HT
metal pipes with AGB
certification, fitted in such a way that
they will not be crushed or pulled
during use. Their bending radius must
not be less than that specified by the
manufacturer.
D
D
B
C
Fig. 9.3
A
BE
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MFCD95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MFCD95 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 40,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info