522890
42
Zoom out
Zoom in
Previous page
1/48
Next page
INSTALLATION
1 The ceiling must bear at least 40kgs weight, and the thickness
of the ceiling must be 30MM, see pic 2. Drill 1*170mm round
hole in the ceiling.
2 According to the hanging board, drill 12 holes in the ceiling, see
pic 2. 12 ST6*40mm big flat screws will be used to fix the
hanging board on the ceiling, and then 8 M4*10 screws and a
M4 nut with gasket will be used to connect the angle iron into
the hanging board, see pic 1. After calculating the length of the
angle iron, 16 M4*10 big flat screws and a M4 nut with gasket
should be used to connect the angle iron and another angle iron (
the overlap length of angle iron can not be less 100MM).
3 Let one side of the extensible pipe go outside through the hole
of 170MM, see pic 3.
4 4 ST4*8 big flat screws will be used to connect the internal
chimney into the hanging board. Then put up the external
chimney, two hooks will be used to put up the external chimney
in order to the next installation, see pic 4.
5 4 ST4*8 big flat screws will be used to install the outlet, see pic
5.
6 Hold up the hood, 16 M4*10 big flat screws will be used to
connect the hood body into angle iron, see pic 6.
7 Put the extendable pipe on the outlet,see pic.7; after ensuring
everythin
g is ok, put down the hook and the external chimney,
then the installation is complete, see pic 8.
3
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MEPK-9050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MEPK-9050 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info