20
Fig. 6.6
Fig. 6.7
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the holes
on the side walls inside the oven (Fig.
6.6)
– Slide the tray and rack into the runners
fig. 6.7.
The rack must be fitted so that the safe-
ty catch, which stops it sliding out, faces
the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 6.8
L
F
OVEN FLOOR
The oven floor “F” (fig. 6.8) can be easily
removed to facilitate cleaning.
Remember to replace the floor correctly
afterwards.
Be careful not to confuse the tray “L”
with the oven floor “F” (fig. 6.8).
INSIDE OF OVEN
The oven should always be cleaned
after use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm
water. Suitable proprietary chemical
cleaners may be used after first consult-
ing with the manufacturers recommen-
dations and testing a small sample of
the oven cavity. Abrasive cleaning
agents or scouring pads/cloths should
not be used on the cavity surface.
NOTE: The manufacturers of this
appliance will accept no responsibility
for damage caused by chemical or
abrasive cleaning.
Let the oven cool down and pay
special attention no to touch the hot
heating elements inside the oven
cavity.
