12
Fig. 4.2
Fig. 4.3
A
If the flame extinguishes for any reason,
the safety valve will automatically shut
off the gas supply to the burner.
To re-light the burner, first turn the oven
control knob to position ●, wait for at
least 1 minute and then repeat the
lighting procedure.
IGNITION OF THE OVEN BURNER
ATTENTION: Never turn the thermostat
before opening the oven door.
To ignite the oven burner:
1 – Open the oven door to the full
extent.
WARNING: Risk of explosion! The
oven door must be open during
this operation.
2 – Lightly press and turn the thermo-
stat knob anti-clockwise (fig. 4.2) to
max position “
”
(fig. 4.1),
then press the knob firmly until the
burner lights.
Never continue this operation for
more than 15 seconds. If the
burner has still not ignited, wait
for about 1 minute prior to
repeating the ignition.
To light the oven burner manually,
approach a flame to the hole ‘A’ of
the oven floor fig. 4.3.
3 – After lighting the burner, wait a few
seconds before releasing the knob
(until the safety valve stays open).
4 – Gently close the oven door and set
the oven control knob to the
required temperature.
For efficient oven preheating, we
recommend that grill trays and
racks are removed from the oven
and replaced after about 15 minutes.
