Manual M-System BPRNF-960ANM (page 108 of 112) (English, German, Dutch, French)

522577

108

Zoom out

Zoom in

1/112

108

3) ADJUSTING OF THE MINIMUM OF

THE TOP BURNERS

In the minimum position the flame must

have a length of about 4 mm and must

remain lit even with a quick turn from the

maximum position to that of minimum.

The flame adjustment is done in the

following way:

– Turn on the burner

– Turn the tap to the MINIMUM position

– Take off the knob

– With a small flat screwdriver turn the

screw inside the tap rod to the correct

regulation (fig. 8.8).

Normally for G30/G31, tighten up the

regulation screw.

The burners are conceived in such a

way so as not to require the regula-

tion of the primary air.

Fig. 8.8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System BPRNF-960ANM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System BPRNF-960ANM Manual

Product: