Manual M-System B-MFCD 95 (page 188 of 196) (English, German, Dutch, French)

680040

188

Zoom out

Zoom in

1/196

188

The gas inlet on the new appliances is

equipped with a parallel thread ISO 228-1.

To assemble it, follow stages 3, 4, 5, and 6

as described below.

Precautions to take:

• the flexible pipe must be mounted so

that it will not be subjected to mechanical

stresses, such as being twisted,

compressed or pulled;

•theflexible pipe mustbe fitted sothatit

will not come into contact with any other

movable piece of furniture;

•it musthave abending radiusof atleast

ten times its outside diameter;

•itmustnotcomeintocontactwithanyhot

surfaces;

•ensurethat it isinstalled in aplace with

easy access, so that its entire length can

be checked.

•itshouldnotbelocatedinanoverheated

environment. and must be protected from

sunlight and ultraviolet rays

Periodical checks and replacement

The gas connection pipe must be checked

at least annually to ensure that there is

no visible deterioration. The hose must be

replaced no later than the replacement date

indicated.

IMPORTANT:

Take the precaution of using two keys when

screwing up the components. (fig. 9.4).

After connecting the gas, use a soapy

solution to check that the connections

are sealed tight, and never use an open

flame.

Fig. 9.4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System B-MFCD 95 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 40,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System B-MFCD 95 Manual

Product: