Manual M-System B-MFCD 95 (page 184 of 196) (English, German, Dutch, French)

680040

184

Zoom out

Zoom in

1/196

184

The walls adjacent to the cooker must be

of material resistant to heat.

GAS CONNECTION

The connection must be executed by

a qualified tecnician according to the

relevant standards.

The appliance is predisposed and

calibrated to operate with the gas

indicated on the specifications plate.

Ensure that the room in which the cooker

is to be installed is adequately ventilated,

in compliance with applicable regulations.

Connection to the gas supply pipe or gas

cylinder must be made in accordance

with the requirements of the applicable

regulations.

The gas supply is connected at the rear of

the cooker (fig. 9.1) to the R or L terminal

of the gas inlet pipe; the connection pipe

must not cross the rear of the appliance.

The terminal not used must be closed off

with the plug T and gasket.

Before installation, make sure that

the local distribution conditions

(type of gas and its pressure) and

the adjustment of this appliance

are compatible. The appliance

adjustment conditions are given on

the plate or the label.

GAS SECTION

Fig. 9.1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System B-MFCD 95 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 40,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System B-MFCD 95 Manual

Product: