Manual M-Locks EM2050 (page 4 of 16) (English)

658516

Zoom out

Zoom in

1/16

4 www.m-locks.com

1 IMPORTANT INSTRUCTIONS

• Before using the lock, please read the instructions for use carefully.

• The instructions for use only relate to the lock itself and not to how to operate the safe.

• Ensure that you only program the lock while the safe door is open.

• After changing the code, always try the code several times with the safe door open.

• Only after several positive function tests (opening / closing) the safe door may be closed.

• Each key entry is confirmed by an audible tone and visual signal. These signals are not referred to in

the description that follows.

• You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad

during this period of 10 seconds, the entry procedure will automatically abort. You must then start

again from the beginning.

• After entering a valid code, you will hear two audible tones. An invalid entry will trigger a long tone.

• After entering an invalid code the first attempt, wait 20 seconds before entering the code again.

• If the code is entered incorrectly on four consecutive occasions, the keypad and the lock will be

disabled for 5 minutes. During this period, the LED will flash every 10 seconds and you will hear a

long tone when attempting to make an entry. Entering an incorrect code on two further occasions

after the keypad has been re-enabled will trigger a new keypad lock-out period of 5 minutes. After

entering a valid code you have four new occasions to enter the code and open the lock.

• The lock works with a six digit code. In some cases it may be that the lock requires a 7-digit

code. For simplicity, it is mentioned only one operation with 6-digit code in this guide.

• At the time of delivery, the lock is set to the standard Manager Code of 1 2 3 4 5 6. Change this

code immediately to your own choice of Manager Code. Do not use personal or other simple data

which can easily be found out for your Manager Code

• If needed, the owner of the Manager Code can add up to 9 codes / users. This code must be imme-

diately changed by the user in a code of their own choice. Do not use personal or other simple data

for your user code.

• Please keep the code always carefully and protect it against improper use by unauthorized persons.

• Depending on the used lock / keypad and the way the lock is installed, there are several ways to

open and to close a safe. By example with a lever or by turning the keypad. Please contact your safe

supplier for more information about your specific situation.

Caution! Don’t forget your code, otherwise the lock can not be used anymore!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-Locks EM2050 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Locks EM2050

M-Locks EM2050 Installation Guide - Dutch - 8 pages

M-Locks EM2050 User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-Locks EM2050 Manual

Product: