707327
17
Zoom out
Zoom in
Previous page
1/51
Next page
16 User Guide Oxygen 88
When a new Velocity Curve is selected using either method described below, the LED screen will display the first 4
Velocity curves as C1 - C4, and the three fixed velocity settings as F1 - F3.
1. Press the Advanced button.
2. Press the Velocity Curve key - the LED screen will display the current velocity curve (for example, ".C.2").
3. Type the Velocity Curve number (1 through 7) using the number keys.
4. Press the Enter key.
Or:
1. Press the Advanced button.
2. Press the Velocity Curve key - the LED screen will display the current velocity curve (for example, ".C.2").
3. Use the "
-" and "+" buttons to scroll through the Velocity Curves (C1 through F3).
4. Press the Enter key.
Drawbar Mode
This parameter switches all 9 Sliders to Drawbar Mode.This reverses the operation of the sliders, so that the maximum
value (127) is at the bottom and the minimum value (0) is at the top.
This feature is intended for use with Organ presets that utilize drawbars.
1. Press the Advanced button.
2. Press the Drawbar key - the LED screen will momentarily display "On".
Drawbar mode becomes active immediately, and Advanced mode exits automatically.
To disable Drawbar mode, repeat steps 1 and 2. The LED screen will momentarily display "OFF".
Memory Dump
The SysEx Memory Dump function (MEM DUMP) will send the contents of all 10 Preset memory locations for storage
in a DAW application. For information on how to record SysEx MIDI data, please refer to the documentation provided
with your DAW software.
1. Prepare a MIDI track within your DAW software to record from your Oxygen 88.
2. Press the Advanced button on your Oxygen 88.
3. Start the MIDI recording in your DAW software.
4. Press the Memory Dump key on your Oxygen 88. The SysEx memory dump will begin immediately, and the LED
screen will display "SYS" to indicate that data is being sent.
The SysEx file will appear as a new MIDI recording in your DAW software.
Restoring a Memory Dump:
IMPORTANT: Restoring a saved Memory Dump will permanently overwrite all current presets on your Oxygen 88.
Play back a MIDI track that contains a previously recorded Oxygen 88 SysEx Memory Dump. The SysEx data is
sent back to Oxygen 88, and the LED screen will display "SYS" while receiving the SysEx data.
NOTE: Restored settings will not become active until a new preset is loaded on your Oxygen 88, or the device has
been powered off and on.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Oxygen 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Oxygen 88 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio Oxygen 88

M-Audio Oxygen 88 Quick start guide - English, German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info