Manual M-Audio Oxygen 25 (page 11 of 88) (English, German, French, Italian, Spanish)

707324

Zoom out

Zoom in

1/88

Setting Toggle Values (Min/Max) for Buttons or the Sustain Pedal

It is possible to set a Toggle Value for a button or the sustain pedal, causing it to send one value when first pressed

and another value when pressed again. This means that one value is sent the first time it is pressed, and another

value is sent the next time it is pressed.

When configuring a button or the sustain pedal to operate in Toggle Mode, the following four values need to be

specified:

Key

Parameter

Value

Control Assign

Toggle On/Off operation

146

Data 1 (example)

MIDI CC number

10 (Pan)

Data 2 (example)

Second press

0 (minimum)

Data 3 (example)

First press

127 (maximum)

NOTE: When working with proprietary M-Audio parameters from the 128-255 range, the "Control Assign" setting is

used to configure a button or the sustain pedal for this special mode of operation. This means that certain values

that are usually specified through the "Control Assign" setting must instead be specified via the "Data 1" parameter

(such as the standard MIDI CC parameter in the example below).

The following example will configure a button to "hard pan" the sound to the right speaker when it is pressed for the

first time, and "hard pan" to the left speaker when it is pressed for a second time. This involves configuring the

button to operate as a toggle, while controlling the Pan parameter (MIDI CC 10):

1. Press the Edit button.

2. Press the Select button or Control Select (Ctrl Sel) key.

3. Select a button as described earlier in this guide.

4. Press the Control Assign (Ctrl Asgn) key.

5. Type 146 using the number keys. This configures the button to operate as a toggle.

6. Press the Data 1 key.

7. Type 10 using the number keys. This specifies which parameter the button will toggle “on and off”. In this

example, MIDI CC 10 (Pan).

8. Press the Data 2 key.

9. Type 0 using the number keys. This sets the second button press value to zero. In other words, sound will be

panned "hard left" when the button is pressed a second time.

10. Press the Data 3 key.

11. Type 127 using the number keys. This sets the first button press value to the maximum value, so that the sound

is panned “hard right” when the button is pressed the first time.

12. Press the Enter key.

TIP: It can be useful to transmit two other specific values instead of sending minimum (zero) and maximum (127)

values as in the above example. When assigning a button to control Pan (MIDI CC 10), you can, for example,

configure Data 2 to send Value 38, and Data 3 to send Value 93, effectively causing pan to switch between the

approximate "ten o’clock" and "two o’clock" positions when pressing the button the first time, and pressing the

button the second time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Oxygen 25 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-Audio Oxygen 25 Manual

Product: