707324
6
Zoom out
Zoom in
Previous page
1/88
Next page
6
7. Velocity-Sensitive Keyboard: The velocity-sensitive keyboard is not only the primary method of
sending Note On/Off and velocity data when performing, it is also used to access extended
programing functions listed along its upper edge.
8. Octave Buttons: The Octave buttons are used to shift the keyboard’s octave range up or down
in one octave increments, extending the octave range of the pads or keys.
9. Pitch Bend Wheel: This wheel creates expressive changes in performances by raising and
lowering pitch. Rolling the Pitch Bend wheel upward will raise an instrument’s pitch whereas
rolling it downward will lower the pitch. The upper and lower pitch bend limit is determined by
settings on your hardware or software synthesizer, not by the Pitch Bend wheel on the Oxygen
25 keyboard itself. Typically, this can be either a half note or an octave up/down. This wheel is
spring mounted and will return to the center detent position when released. The Pitch Bend
wheel is an assignable controller capable of sending a variety of MIDI messages other than pitch
bend data.
10. Modulation Wheel: This wheel is used to add expression to performances by changing the
intensity of certain effects. By default, most synthesizers assign this wheel to control vibrato
(change in intonation) or tremolo (change in volume) although it is usually possible to reassign
the function of this wheel through the instrument’s control panel. Rolling the Modulation Wheel
upward will increase the modulation effect, while rolling downward will reduce the effect. The
Modulation Wheel is an assignable controller capable of sending a variety of MIDI messages
other than Modulation data.
11. Control Button (C10): This mapable button can be assigned to send Note, CC, and other MIDI
messages.
For DirectLink operation, please see the DirectLink User Guide available at
m-audio.com/directlink.
Rear Panel
1. USB Port: The USB 2.0 port (backward-compatible
with USB 1.1) delivers power to the keyboard and
transmits MIDI data when connected to a computer.
2. Sustain Pedal Input: This input accepts a
momentary-contact foot pedal (not included). When
pressed, this pedal will sustain the sound you are
playing without having to keep your fingers pressing down on the keys. The sustain pedal input
can be assigned to send Note, CC, and other MIDI messages.
NOTE: The polarity of the sustain pedal is determined by the keyboard upon startup. When an
Oxygen 25 keyboard is powering up, the sustain pedal is assumed to be in the "up" (Off)
position. It is important that the sustain pedal is not pressed during startup, otherwise the pedal
will reverse its operation, and notes will sustain when the pedal is not pressed.
3. On/Off Switch: Use this switch to power the device on or off. When this switch is set to the “on”
position, Oxygen 25 is powered through the USB connection to your computer.
4. Kensington Lock Connector: This connector is compatible with standard laptop-style
Kensington security cables for theft protection.
USB
SUSTAIN
C17
POWER
ON OFF
1
2
3
4
5
6
7
8
9
10
1
2
3
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Oxygen 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Oxygen 25 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info