707323

M-Audio Keystation Mini 32 MK3 Manual

8
Zoom out
Zoom in
Previous page
1/88
Next page
8
Bank LSB and Bank MSB
Program Changes are most commonly used to change instruments and voices. However, the number of
instruments accessible via Program Changes is limited to 128. However, some devices have more than 128
patches and require a different method of accessing these extra sounds. Most modern hardware
synthesizers and many software synthesizer programs have hundreds of patches that are organized in
banks of sounds.
Generally, these devices use Bank LSB and Bank MSB messages to access the banks, then use program
changes within the banks to access specific patches. Most devices only accept MSB messages, but you
should refer to the documentation for your device or software to confirm which bank message must be sent
first, as this is determined by each manufacturer.
You can send either message type by:
• Sending an Incremental or Decremental change using the Octave buttons, which lets you step
through each bank number in either direction.
– or –
• Entering the bank number using the numerical keys (0 - 9) on your Keystation Mini 32 MK3.
Both methods are explained below for each message type:
To send Incremental/Decremental Bank LSB changes using the Octave buttons:
1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.
2. Press the “DATA = BANK LSB” key (G#, 4th black key from the left).
3. Press the Octave “+” or “-” button to step upwards or downwards through the Bank LSB values. This
takes you through each bank of sounds.
To send Incremental/Decremental Bank MSB changes using the Octave buttons:
1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.
2. Press the “Data = Bank MSB” key (A#, 5th black key from the left).
3. Press the Octave “+” or “-” button to step upwards or downwards through the Bank MSB values. This
takes you through each bank of sounds.
The Data=Bank LSB, Data=Bank MSB value or any data assigned to LSB or MSB is not retained when the
keyboard is turned off. However, the assignment data keys will be.
To send Bank LSB Changes using the numerical keys:
1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.
2. Press the “BANK LSB” key (G#, 5th black key from the right).
3. Use the numerical keys (0 - 9) to enter the Bank LSB number for the bank of sounds you wish to
access.
4. Press the “ENTER” key (G, last white key on the right). The Edit button will return to half brightness
indicating that programming is complete.
To send Bank MSB Changes using the numerical keys:
1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.
2. Press the “BANK MSB” key (A#, 4th black key from the right).
3. Use the numerical keys (0 - 9) to enter the Bank MSB number for the bank of sounds you wish to
access.
4. Press the “ENTER” key (G, last white key on the right). The Edit button will return to half brightness
indicating that programming is complete.
To recall the default bank number (0):
Simultaneously press the “+” and “-” buttons.
Cancel
MIDI Panic
Data: Octave
Data: Transpose
Data: Program
Data: Bank LSB
Data: Bank MSB
Data: Channel
Data: Tuning
Program
Bank LSB
Bank MSB
Modulation Assign
Knob Assign
Pitch Bend Assign
Pitch Bend Rate
Modulation Rate
Velocity
Sustain Mode
Default
0
1
2
3
4
5
6
7
8
9
Enter
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Keystation Mini 32 MK3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Keystation Mini 32 MK3 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio Keystation Mini 32 MK3

M-Audio Keystation Mini 32 MK3 Quick start guide - English, German, French, Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info