707322

M-Audio Keystation 88 II Manual

9
Zoom out
Zoom in
Previous page
1/52
Next page
9
Program Change
Program Changes are used to change the instrument or voice you are using. For the sake of example, we
will change the instrument to a bass sound. To do this we need to send a program change of 32. There are
two ways to send a program change:
Incremental/Decremental Program Change:
1. Press the Advanced Functions button.
2. Press the black key representing PGM CHANGE.
3. Now the Octave “+” and “-” keys can be used to change the program.
4. Press “+” and continue to play notes until you find the instrument you want.
This method is useful if you want to cycle through different instruments to see which sounds best in your
song.
Quick Select Program Change:
1. Press the Advanced Functions button.
2. Press the black key representing “PGM #.”
3. Press keys “3,” “2,” “ENTER.” Now the keyboard will play a bass sound: Number 32.
This method is useful if you want to select a specific number, as is the case here.
If the Octave “+” and “-” keys are selected to vary the Program number (Method 1), the LEDs above the
buttons will not change, since it is not possible to have a Program with a negative value. Pressing both the
“+” and “-” buttons together will recall Program 0, which selects a grand piano sound.
Bank LSB and Bank MSB
Program Changes are most commonly used to change instruments and voices. However, the number of
instruments accessible via Program Changes is limited to 128. Some devices have more than 128 voices
and require a different method to access these extra voices. Generally, these devices use Bank LSB and
Bank MSB messages.
Incremental/Decremental Bank LSB and Bank MSB Changes:
1. Press the Advanced Functions button.
2. Press the black key representing “BANK LSB” or “Bank MSB”, respectively.
3. Now the Octave “+” and “-” keys can be used to change the Bank LSB.
4. Press “+” and continue to play notes until you find the instrument you want.
Using the Quick Select Method:
1. Press the Advanced Functions button.
2. Press the black key representing “Bank LSB” or “Bank MSB,” respectively.
3. Press keys “3,” “2,” “ENTER.”
As with Program Change, if the Octave “+” and “-” keys are selected to vary the Bank LSB or MSB number
(Method 1), the LEDs above the buttons will not change, since it is not possible to have a Bank with a
negative value. Pressing both the “+” and “-” buttons together will recall Bank 0.
Volume Slider Assignment
To assign the Volume Slider to an effect:
1. Press the Advanced Functions button to engage Edit Mode.
2. Press the black key representing “FADER.”
3. Use the Numerical Data Entry keys to enter the number of the effect you want to assign to the
Volume Slider.
Alternatively, you can use the “+” and “-” buttons to change the value:
1. Press the Advanced Functions button to engage Edit Mode.
2. Press the black key representing “FADER.”
3. Use the “+” and “-” buttons to change the value.
4. Press the ENTER key.
5. Move the Volume Slider upwards to increase the value of the effect.
If you have made an error while entering the numerical data value, you can press the “CANCEL” key to exit
Edit Mode without changing the effect assigned to the Volume Slider.
Note that each time the keyboard is turned off, the data assigned to the Volume Slider will be lost. Each time
the keyboard is powered up, the Volume Slider will be assigned to volume (effect number 07) by default.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Keystation 88 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Keystation 88 II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info